-

 Life is fast but I am slow :(

Comments

Post a Comment

Popular posts from this blog

Power Rails from Battery Connector to Charging IC

-
  PP_BATT_VCC : This is the main battery voltage rail that originates directly from the battery connector. It carries the raw battery voltage (typically 3.8V–4.2V, depending on charge level) into the mainboard. It’s the starting point of power distribution and feeds into various subsystems, including the charging and power management circuits. PP_VCC_MAIN : After PP_BATT_VCC, the voltage often passes through protective components (like fuses or MOSFETs) and becomes PP_VCC_MAIN. This rail powers the primary circuits on the board, including the Power Management IC (PMIC) and, indirectly, the charging IC. On the iPhone 12 Pro, this rail is a key intermediary between the battery and downstream power regulation. PP_BUS (or similar intermediate rail)**: Some iPhone designs use an intermediate bus voltage rail (sometimes labeled PP_BUS or a variant) that connects PP_BATT_VCC to the charging IC and other components. This rail might be filtered or regulated slightly before reach...
Read more

42 Powerful Local Marketing Ideas That Work (+Examples!)

-
Image
  Local business owners know digital marketing is critical. Unfortunately, many don’t sustain growth because they cannot maintain consistency or because they run out of ideas. The good news is, effective digital marketing is a beautiful mix of search engine optimization, pay-per-click marketing, content marketing, social media advertising, and more—and with ever-changing trends, there are always ways to come up with new ideas. Yet as a business owner, it can be hard to come up with those new ideas. That’s why we’ve created this guide, which will cover local marketing suggestions and tips in four overarching categories: Local Facebook and Google advertising Local listings and review sites Local SEO Social media marketing Email marketing Community-based marketing Some of these strategies are tried and true, while others may be new to you (rhyme not intentional, but we’ll go with it). The point is, there is something in here for everyone, whether you’re a rookie local marketer or...
Read more

📱 iPhone Startup Process: Electrical Perspective

-
Image
  🔋 1. Power Source & Initial Activation This stage involves powering the device and initializing voltage regulators . Step 1: Battery or Charger Supplies Power The iPhone receives power from either: The battery (connected via VBAT) The Lightning port (if charging or connected to a computer) VBAT Line (Main Battery Line) VBAT is the main power rail connected directly to the battery. It supplies raw battery voltage (3.7V - 4.35V) to the Power Management IC (PMIC) . If VBAT is missing or disrupted, the phone will not power on . ⚡ 2. Power Management & Voltage Regulation Step 2: Power Management IC (PMIC) Activation The PMIC (Power Management Integrated Circuit) is responsible for regulating voltage and distributing power to various components. The PMIC is controlled by the AP_TO_PM_ENABLE signal , which is triggered when the power button is pressed. Step 3: PMIC Generates Power Rails The PMIC takes the raw VBAT voltage and converts it into different power rails: Power...
Read more